Porsche 911 991.1 GT3 Cup Factory Built Race Car (2015)
Sale price: US $105,000.00 Make an Offer
| Used |
| “A good overall example of the 991.1 GT3 Cup variant, the car has had a lot of parts updated over the winter and it has had some work done on the pan of the front tub in the past. Along with it has had a new quarter panel skin replaced on the right side. It is a straight car, but just want to be clear that there has been cosmetics done - no cracks in the cast aluminum or major structural damage in its history. There are a large amount of new parts which will have invoices provided with the sale.” |
| Year: | 2015 | Mileage: | 8723 |
| Sub Model: | GT3 Cup Car | Power Options: | -- |
| Trim: | GT3 Cup Car | Exterior Color: | White |
| Engine: | -- | Transmission: | PDK |
| Fuel Type: | Fuel Cell/Gas | Make: | Porsche |
| Body Type: | -- | Model: | 911 GT3 Cup |
| Vehicle Title: | Clear | Model Year: | 2015 |
| Options: | -- |
Saint Paul, Minnesota, United States
Vehicle description
2015 Porsche GT3 Cup
14,300km total on the car
69hrs on the engine (PMNA sealed engine)
34hrs on the gearbox (PMNA sealed, brand new gearbox that is only 34hrs old)
Setup is completely OEM (GTC6 for PCA), or could be prepped to IMSA Gold Class standards with minimal updates. Car has been recently gone through the and following recommended updates and maintenance has been done:
Megaline shift kit installed
Added driver footwell padding
Rear brake ducting
New fluids (oil, coolant, power steering, brake)
Recaro P1300 seat and rail good through 2026
New Schroth harness installed, good through 2024
New Supercup exhaust setup
Starter rebuilt
Tub wheel wells paints
New front corner radiators
New front bumper installed
New fender flares
Engine and gearbox removed and gone over for reinstall
Suspension aligned and setup to standard/neutral settings
New brake pads and rotors installed
New quarter panel windows (old ones were scratched and didnt look great)
The car was gone through quite extensively this past winter (it had damage last year in the SCCA runoffs and had a new quarter panel installed, the tub was set on a alignment jig to ensure numbers are good, and was repainted and had the entire car gone over).
Numerous new parts were replace including new radiator assemblies, new bumper covers, fenders, flares, headlights replace with new lights that are not chipped and cracked, P1300 seat was updated to a new seat that is certified through 2026 (and slider), new Schroth harness. This is a very clean Cup overall and has been well-maintained with new parts, not used parts. Parts invoices will be provided to the buyer.
Spares included the sale:
Krontec airwand
RSR wheel socket
(2) sets of OEM wheels - all silver, some new
(1) sets of new brake pads
(1) set of spare rear rotors
(1) spare 150A alternator
(1) fuel cell pump out kit
Various suspension arms
Steering gear assembly
Please send any serious inquires, thanks.
14,300km total on the car
69hrs on the engine (PMNA sealed engine)
34hrs on the gearbox (PMNA sealed, brand new gearbox that is only 34hrs old)
Setup is completely OEM (GTC6 for PCA), or could be prepped to IMSA Gold Class standards with minimal updates. Car has been recently gone through the and following recommended updates and maintenance has been done:
Megaline shift kit installed
Added driver footwell padding
Rear brake ducting
New fluids (oil, coolant, power steering, brake)
Recaro P1300 seat and rail good through 2026
New Schroth harness installed, good through 2024
New Supercup exhaust setup
Starter rebuilt
Tub wheel wells paints
New front corner radiators
New front bumper installed
New fender flares
Engine and gearbox removed and gone over for reinstall
Suspension aligned and setup to standard/neutral settings
New brake pads and rotors installed
New quarter panel windows (old ones were scratched and didnt look great)
The car was gone through quite extensively this past winter (it had damage last year in the SCCA runoffs and had a new quarter panel installed, the tub was set on a alignment jig to ensure numbers are good, and was repainted and had the entire car gone over).
Numerous new parts were replace including new radiator assemblies, new bumper covers, fenders, flares, headlights replace with new lights that are not chipped and cracked, P1300 seat was updated to a new seat that is certified through 2026 (and slider), new Schroth harness. This is a very clean Cup overall and has been well-maintained with new parts, not used parts. Parts invoices will be provided to the buyer.
Spares included the sale:
Krontec airwand
RSR wheel socket
(2) sets of OEM wheels - all silver, some new
(1) sets of new brake pads
(1) set of spare rear rotors
(1) spare 150A alternator
(1) fuel cell pump out kit
Various suspension arms
Steering gear assembly
Please send any serious inquires, thanks.