Porsche
Sale price: US $18,000.00 Make an Offer
| Condition: | Used | Make: | Porsche |
| Model Year: | 1998 |
Austin, Texas, United States
Vehicle description
Powertrain
1999 Porsche Boxster - 2.5L M96 (66,000 on engine)
Engine has four events ran on it since installed
Engine is stock – IMS bearing replace with Pelican IMS kit
Cooling system is stock – Has never run hot
Stock headers
Straight exhaust no mufflers -
Stock transmission
Stock Clutch with Sachs pressure plate , clutch and release bearing
New semi Solid tranny and motor mounts - Tarett
Suspension & Chassis
Tarett Engineering Spec Boxster suspension package/front GT3 control arms sway bars and end links
Bilstein PSS9’s -500# – 450# and 890# x 4 currently installed -
Wheel bearings replaced on all four corners 10-12 events on them
Aligned and corner balance with 180# in drivers seat new wheel stud conversion - Tarett
Steel Braided Brake Lines
Pagid Yellow/orange
Motul 660
Safety
Cage built in house by SoulSpeed designed for all driver heights – Nascar door bars both sides
Fiber glass top RaceTech Halo seat
NRG Quick release Oil pressure and temp gauges
Team tech top net in hand but not installed (PCA rules require them)
Kill switch with interior/ exterior remote pulls
Race Tech six point belts
SPA Fire suppression system – nozzles in cab, fuel cell and engine bay (6 total) One set of spares - non OEM all 8.5" wide stock dimensions.
Buyer sets up and pays for transport
1999 Porsche Boxster - 2.5L M96 (66,000 on engine)
Engine has four events ran on it since installed
Engine is stock – IMS bearing replace with Pelican IMS kit
Cooling system is stock – Has never run hot
Stock headers
Straight exhaust no mufflers -
Stock transmission
Stock Clutch with Sachs pressure plate , clutch and release bearing
New semi Solid tranny and motor mounts - Tarett
Suspension & Chassis
Tarett Engineering Spec Boxster suspension package/front GT3 control arms sway bars and end links
Bilstein PSS9’s -500# – 450# and 890# x 4 currently installed -
Wheel bearings replaced on all four corners 10-12 events on them
Aligned and corner balance with 180# in drivers seat new wheel stud conversion - Tarett
Steel Braided Brake Lines
Pagid Yellow/orange
Motul 660
Safety
Cage built in house by SoulSpeed designed for all driver heights – Nascar door bars both sides
Fiber glass top RaceTech Halo seat
NRG Quick release Oil pressure and temp gauges
Team tech top net in hand but not installed (PCA rules require them)
Kill switch with interior/ exterior remote pulls
Race Tech six point belts
SPA Fire suppression system – nozzles in cab, fuel cell and engine bay (6 total) One set of spares - non OEM all 8.5" wide stock dimensions.
Buyer sets up and pays for transport