Corvette fiberglass race car Body- Rolling - Vintage Sled Pull Car - WOW! (1963)
Sale price: US $6,500.00 Make an Offer
| Condition: | Used | Model Year: | 1963 |
| Modified Racer: | Yes | Model: | Corvette |
| Vintage Racer: | Yes | Make: | Chevrolet |
Grant, Alabama, United States
Vehicle description
1963 Corvette Replica fiberglass race car Body- Rolling - Vintage Tractor Pull Car BARN FIND - WOW!. Condition is Used.
VEHICLE can be modified for full race or use it for RARE Tractor Pull Car.
* This is a rare and Vintage REPLICA 1963 Split-Window Fiberglass Race Car - Rolling Chassis. (* THIS IS NOT A REAL CORVETTE BODY - IT"S A REPLICA* ) The Fiberglass is heavy/thick and not a skin or lightweight flexible body. It"s reinforced and strengthened throughout the body to make it more rigid and straight. Would make a Killer Pro Mod car too.! It was located a few months ago sitting in a Junk Yard with a LOT of dirt and trash on it. I brought it home and washed it and nothing else was done to prep it for this sale. iF THE FRAME WAS PAINTED AND A LITTLE MORE CLEANING WAS DONE IT WOULD LOOK SUPER!
* It"s EXACTLY AS i FOUND IT. NO MODS OR CHANGES. - IT"S A SNAPSHOT OUT OF TIME.
* THIS WOULD MAKE A GREAT PROP FOR A CAR DEALERSHIP - SPEED SHOP - CAR PARTS SHOP - OR RACE TRACK - IT TURNS HEADS WHENEVER ANYONE SEES IT SINCE THEY CAN"T FIGURE OUT WHAT THOSE WIDE ASS TIRES ARE FOR FOR?
* IF YOU"VE EVER WANTED TO TRY YOUR HAND AT TRACTOR/SLED PULLING - THIS IS YOUR CHANCE TO DO IT IN RARE STYLE WITH A CORVETTE .
* The name: JOHN HANSEN is painted on both doors and I"m not sure it it"s the same John Hansen Racing found on the Interweb FACEBOOK Page located in Colorado ?.
* Even though the paint is faded in the pics, it can be polished up to a shine. I did not want to impact the pin stripping and graphics by doing so, but I did try it on one small section and the shine came through.
* Still has one battery installed (old) and even the Drive Shaft, most of the wiring, and tires.
* It has HUGE 18.4 wide by 16.1 tall Goodyear tires on the back with 6 inch x 15 tires on the front.
* The molding around the front lower window has turned loose and will need to be screwed or riveted back in place, but it"s a simple fix. - see pic.
* ALL of the windows will need to be cleaned/polished or replaced to see out of - I"m sure it"s Lexan or some type of Plexiglass.
* It does have nicks, cracks in the fiberglass, chips, peeling paint, faded paint, and other imperfections from OFF ROAD use.
* It will need gauges, fuel cell, batteries and a little wiring to get it going again with a new engine and transmission.
* The front end is a straight axle with rack-in-Pinion steering but it doesn"t turn like a regular race car - It"s made to go straight!
* The full body tilts with an electric actuator and I"m not sure if it"s 12-volts or 24-volts since it uses 2 batteries (CONDITION OF ACTUATOR UNKNOWN) - But you can still raise the full body up and use a board for a prop or pole.
* The frame is a square tube custom heavy duty frame with a chrome shield or aluminum panel overlaying it for looks and protection.
* It has cool DUAL aluminum brake pedals/ master cylinders in the cab for EACH of the rear disc brakes for steering the wheels.
* There is an escape hatch or FLAP in the roof of the Corvette that is easy to open in case of emergency.
* ALL tires are holding air, but would need to be replaced for safety reasons, Front tire rims are mounted for rolling ONLY at this time.
* This is a FULL Corvette REPRODUCTION Fiberglass body even though it looks like it was a "Door Included" body at one point but the fiberglass work is still in good condition. BUMPERS ARE MOLDED IN FIBERGLASS - NOT STEEL - THERE ARE A FEW ORIGINAL CORVETTE BADGES - THE GAS TANK BADGE DOES NOT FLIP UP SINCE THIS USES A FUEL CELL - LOOK AT PHOTOS FOR MORE INFO.
* i Don"t know anything about the rear end or gears as to their condition since I don"t know anything about this type of axle.
* NOTHING ELSE IS INCLUDED IN THE AUCTION OTHER THAN WHAT YOU SEE IN THE PICTURES- THERE"S NO HOOD SCOOP OR REAR END HOOKUP COVER!
*This Vehicle does not come with a title, Only a NOTARIZED Bill of Sale since Alabama doesn"t title older cars, or Race cars. But I will work with the Buyer if they need something else if I can.
This Race Car would make a GREAT Promotional vehicle or Prop for a Speed Shop or Car Dealership since it DEMANDS a LOT of Attention where ever it goes. .GUARANTEED!
* This Corvette is a Barn Find that I located several months ago and all I did was wash it and prep it for this Sale. I don"t know the history of the racer even though I"ve seen his this name on the Interweb.
* There is some usual racing damage on the body as well as some paint chipping or cracks. SEE PICS!
WILL ACCEPT OFFERS, TRADES, FOR ANYTHING INTERESTING - A GOOD TRUCK OR OTHER HOT ROD - T-BUCKET- ROADSTER ECT.- LET ME KNOW WHAT YOU HAVE!
SHIPPING IS THE RESPONSIBILITY OF THE BUYER - I"LL HELP IN ANY WAY WITH YOUR SHIPPER OR CAN PROVIDE A NAME OF A LOCAL SHIPPER IF YOU NEED IT DELIVERED ANYWHERE IN THE SOUTH. .
A $500.00 DEPOSIT IS REQUIRED WITHIN 24 HOURS - IF YOU HAVE LESS THAN 25 + FEEDBACK"S - DON"T BID UNTIL YOU CONTACT ME FIRST!
N O T I C E S A T E M A I L D O T C O M
* * THERE IS NO WARRANTY - GIVEN OR IMPLIED OR OTHERWISE STATED AS TO THE ABILITY TO RACE THIS VEHICLE - IT"S UP TO THE BUYER TO INSPECT THIS VEHICLE BEFORE THE SALE TO SEE WHAT THEY ARE BUYING - IF YOU NEED MORE PHOTOS PLEASE LET ME KNOW - OF IF YOU HAVE ANY QUESTIONS.
THIS VEHICLE IS LOCATED NEAR GUNTERSVILLE, ALABAMA OFF OF HWY 431 -
FULL PRICE IS EXPECTED WITHIN 7 DAYS OF AUCTION END AND - NOOOO! REFUNDS ON THE DEPOSIT!
VEHICLE SOLD AS-IS- WHERE-IS -!
THANKS
* * Car also has the original racing weights on the rear end as seen in the photos.
.
VEHICLE can be modified for full race or use it for RARE Tractor Pull Car.
* This is a rare and Vintage REPLICA 1963 Split-Window Fiberglass Race Car - Rolling Chassis. (* THIS IS NOT A REAL CORVETTE BODY - IT"S A REPLICA* ) The Fiberglass is heavy/thick and not a skin or lightweight flexible body. It"s reinforced and strengthened throughout the body to make it more rigid and straight. Would make a Killer Pro Mod car too.! It was located a few months ago sitting in a Junk Yard with a LOT of dirt and trash on it. I brought it home and washed it and nothing else was done to prep it for this sale. iF THE FRAME WAS PAINTED AND A LITTLE MORE CLEANING WAS DONE IT WOULD LOOK SUPER!
* It"s EXACTLY AS i FOUND IT. NO MODS OR CHANGES. - IT"S A SNAPSHOT OUT OF TIME.
* THIS WOULD MAKE A GREAT PROP FOR A CAR DEALERSHIP - SPEED SHOP - CAR PARTS SHOP - OR RACE TRACK - IT TURNS HEADS WHENEVER ANYONE SEES IT SINCE THEY CAN"T FIGURE OUT WHAT THOSE WIDE ASS TIRES ARE FOR FOR?
* IF YOU"VE EVER WANTED TO TRY YOUR HAND AT TRACTOR/SLED PULLING - THIS IS YOUR CHANCE TO DO IT IN RARE STYLE WITH A CORVETTE .
* The name: JOHN HANSEN is painted on both doors and I"m not sure it it"s the same John Hansen Racing found on the Interweb FACEBOOK Page located in Colorado ?.
* Even though the paint is faded in the pics, it can be polished up to a shine. I did not want to impact the pin stripping and graphics by doing so, but I did try it on one small section and the shine came through.
* Still has one battery installed (old) and even the Drive Shaft, most of the wiring, and tires.
* It has HUGE 18.4 wide by 16.1 tall Goodyear tires on the back with 6 inch x 15 tires on the front.
* The molding around the front lower window has turned loose and will need to be screwed or riveted back in place, but it"s a simple fix. - see pic.
* ALL of the windows will need to be cleaned/polished or replaced to see out of - I"m sure it"s Lexan or some type of Plexiglass.
* It does have nicks, cracks in the fiberglass, chips, peeling paint, faded paint, and other imperfections from OFF ROAD use.
* It will need gauges, fuel cell, batteries and a little wiring to get it going again with a new engine and transmission.
* The front end is a straight axle with rack-in-Pinion steering but it doesn"t turn like a regular race car - It"s made to go straight!
* The full body tilts with an electric actuator and I"m not sure if it"s 12-volts or 24-volts since it uses 2 batteries (CONDITION OF ACTUATOR UNKNOWN) - But you can still raise the full body up and use a board for a prop or pole.
* The frame is a square tube custom heavy duty frame with a chrome shield or aluminum panel overlaying it for looks and protection.
* It has cool DUAL aluminum brake pedals/ master cylinders in the cab for EACH of the rear disc brakes for steering the wheels.
* There is an escape hatch or FLAP in the roof of the Corvette that is easy to open in case of emergency.
* ALL tires are holding air, but would need to be replaced for safety reasons, Front tire rims are mounted for rolling ONLY at this time.
* This is a FULL Corvette REPRODUCTION Fiberglass body even though it looks like it was a "Door Included" body at one point but the fiberglass work is still in good condition. BUMPERS ARE MOLDED IN FIBERGLASS - NOT STEEL - THERE ARE A FEW ORIGINAL CORVETTE BADGES - THE GAS TANK BADGE DOES NOT FLIP UP SINCE THIS USES A FUEL CELL - LOOK AT PHOTOS FOR MORE INFO.
* i Don"t know anything about the rear end or gears as to their condition since I don"t know anything about this type of axle.
* NOTHING ELSE IS INCLUDED IN THE AUCTION OTHER THAN WHAT YOU SEE IN THE PICTURES- THERE"S NO HOOD SCOOP OR REAR END HOOKUP COVER!
*This Vehicle does not come with a title, Only a NOTARIZED Bill of Sale since Alabama doesn"t title older cars, or Race cars. But I will work with the Buyer if they need something else if I can.
This Race Car would make a GREAT Promotional vehicle or Prop for a Speed Shop or Car Dealership since it DEMANDS a LOT of Attention where ever it goes. .GUARANTEED!
* This Corvette is a Barn Find that I located several months ago and all I did was wash it and prep it for this Sale. I don"t know the history of the racer even though I"ve seen his this name on the Interweb.
* There is some usual racing damage on the body as well as some paint chipping or cracks. SEE PICS!
WILL ACCEPT OFFERS, TRADES, FOR ANYTHING INTERESTING - A GOOD TRUCK OR OTHER HOT ROD - T-BUCKET- ROADSTER ECT.- LET ME KNOW WHAT YOU HAVE!
SHIPPING IS THE RESPONSIBILITY OF THE BUYER - I"LL HELP IN ANY WAY WITH YOUR SHIPPER OR CAN PROVIDE A NAME OF A LOCAL SHIPPER IF YOU NEED IT DELIVERED ANYWHERE IN THE SOUTH. .
A $500.00 DEPOSIT IS REQUIRED WITHIN 24 HOURS - IF YOU HAVE LESS THAN 25 + FEEDBACK"S - DON"T BID UNTIL YOU CONTACT ME FIRST!
N O T I C E S A T E M A I L D O T C O M
* * THERE IS NO WARRANTY - GIVEN OR IMPLIED OR OTHERWISE STATED AS TO THE ABILITY TO RACE THIS VEHICLE - IT"S UP TO THE BUYER TO INSPECT THIS VEHICLE BEFORE THE SALE TO SEE WHAT THEY ARE BUYING - IF YOU NEED MORE PHOTOS PLEASE LET ME KNOW - OF IF YOU HAVE ANY QUESTIONS.
THIS VEHICLE IS LOCATED NEAR GUNTERSVILLE, ALABAMA OFF OF HWY 431 -
FULL PRICE IS EXPECTED WITHIN 7 DAYS OF AUCTION END AND - NOOOO! REFUNDS ON THE DEPOSIT!
VEHICLE SOLD AS-IS- WHERE-IS -!
THANKS
* * Car also has the original racing weights on the rear end as seen in the photos.
.