NEW 2022 UTILITY 53' x 102'' 4000DX DRY FREIGHT SEMI-TRAILER
Sale price: US $49,999.00 Make an Offer
| Condition: | New | Year: | 2022 |
| Hitch Type: | Fifth-Wheel | Length (feet): | 53 |
| Enclosed Trailer: | Yes | For Sale By: | Private Seller |
| Part Type: | Door | Model: | VS2DX |
| Carrying Capacity (lbs.): | 55,000 LBS EVENLY DISTRIBUTED PAYLOAD CAPACITY | Trailer Shape: | Box |
| Make: | Utility |
Knoxville, Tennessee, United States
Vehicle description
MODEL VS2DX
PAYLOAD CAPACITY 55,000 LBS EVENLY DISTRIBUTED PAYLOAD CAPACITY GROSS VEHICLE WEIGHT RATING 65,000 LBS GVWR
4000D-X101.25 SYSTEM 4000D-X101.25 SIDEWALL SYS INCLS 3/8" 14GA & 18GA STEEL HAT SHPD POSTS W/"A" SLOTS ON 8" C/L
GREENHOUSE GAS COMPLIANCE THIS TRAILER IS NOT UTMC GHG2 CERTIFIED
53"0" OVERALL LENGTH OVERALL HEIGHT 13"6" O/A HEIGHT ON 46-1/2" FIFTH HEIGHT FOR 110-3/16" POST HEIGHT WIDTH 102-3/8" OVERALL WIDTH INSIDE HEIGHT 110-1/2" INSIDE HEIGHT AT FRONT; 111" INSIDE HEIGHT AT REAR INSIDE WIDTH 101" INSIDE WIDTH AT WEARBAND (+/- 1/4" TOLERANCE)
DECK TYPE STRAIGHT DECK WITH 1/2" WEDGE FRONT SUBFRAME 3-1/2" DEEP BOX BEAM DESIGN FRONT SUBFRAME RAISED 1-3/8" FLUSH WITH TOP OF FLOOR APPROACH PLATE 8 GA CARBON STEEL FULL WIDTH APPROACH PLATE KINGPIN PLATE 3 GA HIGH STRENGTH STEEL FULL WIDTH KINGPIN PLATE KINGPIN TYPE AAR HARDNESS CRUCIFORM KINGPIN KINGPIN LOCATION 36" KINGPIN LOCATION COVER PLATE Ü EXTRUDED ALUMINUM COVER PLATE ON LOWER FRONT WALL
SUPPORT LEG LOCATION SUPPORT LEG LOCATION OF 105" FROM C/L OF KINGPIN SUPPORT LEG CRANK LOCATION ROADSIDE SUPPORT LEG CRANK LOCATION SUPPORT LEG BRACING BOLT-ON CROSS BRACING WITH 7 GA 3-1/4" DEEP HIGH STRENGTH STEEL CHANNEL SUPPORT LEGS JOST A401 ENHANCED 50,000 LBS CAPACITY SUPPORT LEGS W/10"X10" ULTRA LOW PROFILE CUSHION FOOT
BOTTOM RAILS 10-5/8" DEEP HEAVY DUTY EXTRU ALUMINUM BOTTOM RAILS CROSSMEMBERS FRONT SUB TO LEGS 2-3/16" STEEL HAT SHAPED C-MEMS WITH CONTINUOUS ENDPLATE CROSSMEMBERS OVER SUPPORT LEGS (5) 4" STEEL I BEAM CROSSMEMBERS WITH (4) RIVET END CLIPS ON 12" C/L OVER SUPPORT LEGS CROSSMEMBERS LEGS TO REAR SUB 4" STEEL I BEAM CROSSMEMBERS W/ (4) RIVET END CLIPS ON 12" C/L LEGS TO REAR SUB CROSSMEMBERS OVER REAR SUBFRAME 4" STL I BEAM C-MEMS W/(4) RIVET END CLIPS 12" C/L OVER REAR SUB 7-Rear Subframe HORIZONTAL DOCK BUMPER BASE SPEC: 7"HRZ BMPR W/ 1/4" REINF PLATE & 2"ADDL DOCK LOCK CLEARANCE X11"LG @ C/L OF BUMPER (1) PAIR RUBBER DOCK BUMPERS 1/2" PROUD
$500 NON refundable deposit required immediately! !