Armored Swat Tactical Troop Transport Rail Vehicle Truck Crane Compressor Foam
Sale price: US $15,000.00 Make an Offer
| Used |
| “NEAT Truck! Loaded with all the options!” |
| Year: | 2006 | VIN : | 1HTMKAAN56H313702 |
| Mileage: | 2928 | Transmission Speeds: | 5 Speed |
| Engine Make: | International | Model: | 4400 |
| Class: | Class 8 (33,001 lbs. or more) | For Sale By: | Dealer |
| Fuel Type: | Diesel | Vehicle Title: | Clear |
| Engine Horsepower: | 285 | Type: | Armored Swat |
| Tire Size: | 22.5" | Make: | International |
| Number of Axles: | Tandem | Power Options: | Cruise Control, Power Locks, Power Windows |
| Transmission Type: | Automatic |
Orem, Utah, United States
Vehicle description
Armored Swat Tactical Troop Transport Rail Vehicle Truck 2006 International 4400 IMT Crane, Compressor, Air Kwik Firefighting System
FINANCING AVAILABLE - NO PAYMENT FOR 90 DAYS!*
Please call Gary 855*922*1281 with any questions or to discuss any additional details including price!
* 2006 International 4400 Armored Rail Swat Truck
* This Emergency High Rail Vehicle was built to operate in the tunnels for the subway system and to be used on the surface light rail system and on Metrolink, Amtrak and freight train rail lines.
* Allison 5 speed automatic transmission with two (2) PTOs and on dash mounted pushbutton controls
* 285 HP 7.6L DT466 Turbo Diesel International
* Hydraulic Auto Crane PTO driven IMT model 5200 hydraulic crane 42" 3 Stage 8,300 LB rated lift with outriggers. 2 Hydraulic stages and 1 Manual stage. Located aft on the curb-side to allow removal of shoring timbers and rescue equipment from the sub floor or under bed storage racks
* 30 KW PTO driven generator with 120V and 240V AC
* Air-Kwik, Inc model AK-100 with 100 gallon ASME code rated at 200-psi working pressure, auto retract hose reel and 75 ft “Live Line” reel booster hose, 1” shutoff ball valve, 1” bubble cup foam aspirating spray tip
* Ballistic Armored Plates. Fold out and removable located at the rear of the vehicle with vision slots and firing ports. Ballistic plates that meet NIJ Level III protection against a Cal 30-06 round, 166-grain bullet at 2,600 to 2,900 fps
* Boss Air Compressor with 120 gallon under bed mounted tank 50CFM at 120 PSI with only 6 hours
* Spotting tractor configuration to allow driver to safely exit vehicle. Folding cat walk to front of vehicle with a center mounted ramp available to platform level.
* Hi-Rail Gear with Hi-Rail Performance, Track Design. The gears are all steel construction with cast steel wheels. The gauge is standard 56 ½” steel with tapered roller bearings. Conforms to all Authority’s Transit Rail Lines, track designs and clearances when traveling over sharp radius curves, station platforms, signals, walkways, and over highway crossing track designs and clearance dimensions are:
Minimum Curvature: 87 Feet Radius
Maximum Grade: 6.0 Grade
Rail: 115 RE
Rail Cant: 1:40
Track Gauge Std gauge 56-1/2 “
Super Elevation: 0” to 6”
Turnouts (most restrictive): 190 ft radius.
Mainline: 190 ft to No. 15
* Engine cooling system capable of maintaining operating temperature in reverse operation in subway tunnel environment
* Heavy-duty air-ride suspension with Tag Axle. Suspension system able to adjust the height of truck under different loads to maintain height level with rail car or rail platform (within 4 inches)
* An Auxillary Transmission Cooler externally mounted, capable of cooling the vehicle’s transmission in forward or rear operation
* Tactical non-reflective flat polyurethane black paint
* Dual HD Winches located at the front and rear of the vehicle
* PTO powered hydraulic pump
* One top mounted light bar with cab mounted switch panel(s), Halogen alley lights and cab mounted control center Whelen CenCom model CCSRN Siren amplifier with CCMICX20 microphone extension cable, SA314P speaker
* Roof mounted Siren and front and rear pintle hooks, each 20,000 lbs capacity
* Bed height at same elevation as both the rail car and rail station platform height of approx. 39 “
* Remote Command Station with drawers, map cases, storage boxes, lights, receptacles, OTS type metal unit aluminum modular CP unit with backlit whiteboard
* Back to back bench seating for 16 at the center of the flat bed with equipment storage under seats. Seat backs shall accommodate 4’x8’ sheets of plywood shoring material. Flip open seat top with storage under seat
* Removable type safety railing 42” high with aluminum stake rails at both sides of the bed at the full length of the flat bed
* Overhead metal storage extending the full length of the vehicle to store ladders, pikes, poles, rescue equipment, and several lengths of wood timber shoring material. Frame capable of carrying to 8,000 lbs of equipment
* Sub floor or under bed storage racks for shoring timbers and rescue equipment
* Boarding ramp with non-skid surface for boarding the train from the High Rail Truck
* Rear View Camera System with video and audio. One operator compartment monitor and one exterior camera on front and rear
* Power Receptacles: Main Bus outlets and circuit breakers at the front, center and rear of vehicle work platform
* Dash mounted commercial satellite GPS navigation system
S/N: 1HTMKAAN56H313702
Odometer Reads: 2,928
Inspector: Robert Sorrells 801*473*6800
W: 96" x H: 11" x L: 37"
Weight:
LOCATION: Orem, UT 84057 NEAR: Salt Lake City Area
FINANCING
We have financing options available. Please call Candi for information at 801*358*9635
SHIPPING ESTIMATES
We have network of shipping brokers coast to coast allowing for the best shipping rates possible. We pride ourselves in getting quick quotes and for the lowest cost possible. For a more accurate detailed shipping price to your location, please call Candi at 801*358*9635
* FINAL TERMS ARE SUBJECT TO CREDIT APPROVAL *
FINANCING AVAILABLE - NO PAYMENT FOR 90 DAYS!*
Please call Gary 855*922*1281 with any questions or to discuss any additional details including price!
* 2006 International 4400 Armored Rail Swat Truck
* This Emergency High Rail Vehicle was built to operate in the tunnels for the subway system and to be used on the surface light rail system and on Metrolink, Amtrak and freight train rail lines.
* Allison 5 speed automatic transmission with two (2) PTOs and on dash mounted pushbutton controls
* 285 HP 7.6L DT466 Turbo Diesel International
* Hydraulic Auto Crane PTO driven IMT model 5200 hydraulic crane 42" 3 Stage 8,300 LB rated lift with outriggers. 2 Hydraulic stages and 1 Manual stage. Located aft on the curb-side to allow removal of shoring timbers and rescue equipment from the sub floor or under bed storage racks
* 30 KW PTO driven generator with 120V and 240V AC
* Air-Kwik, Inc model AK-100 with 100 gallon ASME code rated at 200-psi working pressure, auto retract hose reel and 75 ft “Live Line” reel booster hose, 1” shutoff ball valve, 1” bubble cup foam aspirating spray tip
* Ballistic Armored Plates. Fold out and removable located at the rear of the vehicle with vision slots and firing ports. Ballistic plates that meet NIJ Level III protection against a Cal 30-06 round, 166-grain bullet at 2,600 to 2,900 fps
* Boss Air Compressor with 120 gallon under bed mounted tank 50CFM at 120 PSI with only 6 hours
* Spotting tractor configuration to allow driver to safely exit vehicle. Folding cat walk to front of vehicle with a center mounted ramp available to platform level.
* Hi-Rail Gear with Hi-Rail Performance, Track Design. The gears are all steel construction with cast steel wheels. The gauge is standard 56 ½” steel with tapered roller bearings. Conforms to all Authority’s Transit Rail Lines, track designs and clearances when traveling over sharp radius curves, station platforms, signals, walkways, and over highway crossing track designs and clearance dimensions are:
Minimum Curvature: 87 Feet Radius
Maximum Grade: 6.0 Grade
Rail: 115 RE
Rail Cant: 1:40
Track Gauge Std gauge 56-1/2 “
Super Elevation: 0” to 6”
Turnouts (most restrictive): 190 ft radius.
Mainline: 190 ft to No. 15
* Engine cooling system capable of maintaining operating temperature in reverse operation in subway tunnel environment
* Heavy-duty air-ride suspension with Tag Axle. Suspension system able to adjust the height of truck under different loads to maintain height level with rail car or rail platform (within 4 inches)
* An Auxillary Transmission Cooler externally mounted, capable of cooling the vehicle’s transmission in forward or rear operation
* Tactical non-reflective flat polyurethane black paint
* Dual HD Winches located at the front and rear of the vehicle
* PTO powered hydraulic pump
* One top mounted light bar with cab mounted switch panel(s), Halogen alley lights and cab mounted control center Whelen CenCom model CCSRN Siren amplifier with CCMICX20 microphone extension cable, SA314P speaker
* Roof mounted Siren and front and rear pintle hooks, each 20,000 lbs capacity
* Bed height at same elevation as both the rail car and rail station platform height of approx. 39 “
* Remote Command Station with drawers, map cases, storage boxes, lights, receptacles, OTS type metal unit aluminum modular CP unit with backlit whiteboard
* Back to back bench seating for 16 at the center of the flat bed with equipment storage under seats. Seat backs shall accommodate 4’x8’ sheets of plywood shoring material. Flip open seat top with storage under seat
* Removable type safety railing 42” high with aluminum stake rails at both sides of the bed at the full length of the flat bed
* Overhead metal storage extending the full length of the vehicle to store ladders, pikes, poles, rescue equipment, and several lengths of wood timber shoring material. Frame capable of carrying to 8,000 lbs of equipment
* Sub floor or under bed storage racks for shoring timbers and rescue equipment
* Boarding ramp with non-skid surface for boarding the train from the High Rail Truck
* Rear View Camera System with video and audio. One operator compartment monitor and one exterior camera on front and rear
* Power Receptacles: Main Bus outlets and circuit breakers at the front, center and rear of vehicle work platform
* Dash mounted commercial satellite GPS navigation system
S/N: 1HTMKAAN56H313702
Odometer Reads: 2,928
Inspector: Robert Sorrells 801*473*6800
W: 96" x H: 11" x L: 37"
Weight:
LOCATION: Orem, UT 84057 NEAR: Salt Lake City Area
FINANCING
We have financing options available. Please call Candi for information at 801*358*9635
SHIPPING ESTIMATES
We have network of shipping brokers coast to coast allowing for the best shipping rates possible. We pride ourselves in getting quick quotes and for the lowest cost possible. For a more accurate detailed shipping price to your location, please call Candi at 801*358*9635
* FINAL TERMS ARE SUBJECT TO CREDIT APPROVAL *