Custom (2020)
Sale price: US $1,950.00 Make an Offer
| Condition: | New | Year: | 2020 |
| Trailer Access Type: | Ramp | Trailer Shape: | Box |
| Length (feet): | 10 | Hitch Type: | Bumper Pull |
| Make: | Custom | Carrying Capacity (lbs.): | 3500 |
Vineland, New Jersey, United States
Vehicle description
One of a kind 6x10 foot single axle folding trailer. This was a quarantine project of mine and I copied the design after a Canadian company. I took the design and added on every aspect. All the components are the best of the best. I never intended on selling but am being relocated for work and cannot take the trailer. As you can see in the pictures, this trailer folds and stores upright against a wall only sticking out the height of the tire. I have only used this trailer 3 times to pick up some lumber.
The axle is dexter 3500 lbs with electric brakes and shock kit. All LED lights and 7 pin wiring with quick disconnect waterproof box next to trailer tongue. This trailer is built from 4 inch channel steel with 2x2 angle for floor supports. The floor is 3/4 treated plywood with truck bed coating. The under side not the trailer is painted with auto grade frame paint. The tongue is 3x3 inch square steel with a 5,000 lbs 2 inch couple. Fulton swing away jack with wheel lock and handle holder. Traveller winch mounted at front to assist in loading items and pulling the trailer against the wall for storage. Has quick disconnect for car battery and wireless remote. 15 inch aluminum black wheels with radial tires. 2 ratcheting straps bolted to frame. 2x12 removable racks with the front and back pieces being ramps.
The folding action takes less than 3 minutes. 2 spring loaded pins are pulled for the rear 3’ deck to fold over and lay flush on the front 7’ deck. The 2 ratcheting straps then fasten to eye bolts to hold in place. Pull the pin below the winch and use the winch to pull the front of the trailer towards the wall. The tongue will rotate towards the ground as the winch pulls the trailer up. As the trailer is pulled toward the wall, the tires will come off the ground and rest on 1/4 inch thick steel stands. Once vertical, the tongue acts as a kick stand to prevent the trailer from falling.
All components were purchased at etrailer or at g&e trailers in Vineland. Everything is top quality and overbuilt. This trailer could easily handle 5000 lbs with a larger capacity axle. I did not have time to register but have all the receipts needed to do so. Just go into DMV and ask to register a home built trailer to get a plate. You will never find another trailer like this. The white frame can be painted any color.
The axle is dexter 3500 lbs with electric brakes and shock kit. All LED lights and 7 pin wiring with quick disconnect waterproof box next to trailer tongue. This trailer is built from 4 inch channel steel with 2x2 angle for floor supports. The floor is 3/4 treated plywood with truck bed coating. The under side not the trailer is painted with auto grade frame paint. The tongue is 3x3 inch square steel with a 5,000 lbs 2 inch couple. Fulton swing away jack with wheel lock and handle holder. Traveller winch mounted at front to assist in loading items and pulling the trailer against the wall for storage. Has quick disconnect for car battery and wireless remote. 15 inch aluminum black wheels with radial tires. 2 ratcheting straps bolted to frame. 2x12 removable racks with the front and back pieces being ramps.
The folding action takes less than 3 minutes. 2 spring loaded pins are pulled for the rear 3’ deck to fold over and lay flush on the front 7’ deck. The 2 ratcheting straps then fasten to eye bolts to hold in place. Pull the pin below the winch and use the winch to pull the front of the trailer towards the wall. The tongue will rotate towards the ground as the winch pulls the trailer up. As the trailer is pulled toward the wall, the tires will come off the ground and rest on 1/4 inch thick steel stands. Once vertical, the tongue acts as a kick stand to prevent the trailer from falling.
All components were purchased at etrailer or at g&e trailers in Vineland. Everything is top quality and overbuilt. This trailer could easily handle 5000 lbs with a larger capacity axle. I did not have time to register but have all the receipts needed to do so. Just go into DMV and ask to register a home built trailer to get a plate. You will never find another trailer like this. The white frame can be painted any color.