GM Savana 4500 (2017)
Sale price: US $20,900.00 Make an Offer
| Condition: | Year: | 2017 | |
| Mileage: | 22,490 | Fuel Type: | Gas |
| Make: | GM | For Sale By: | Dealer |
| Model: | Savana 4500 | Water Capacity (Gallons): | None |
| Air Conditioners: | 2 | Sleeping Capacity: | 2 |
| Type: | RV | Vehicle Title: | Clear |
Brookings, South Dakota, United States
Vehicle description
Custom built dually Conversion Van -RV 2017 Assembled GMC Savana 4500. It was built by marrying two vehicles:
A frame, powertrain, suspensions, and differential, wire harnesses, dashboard, modules, etc. . out of 2010 Chevrolet Express Cutaway Dually (159" WB) having 19k mile and a RV body out of a 2003 GMC Savana 2500 RV extended cab (155"" WB) having 42k mile. Everything under the cabin including wire harnesses, ECM, EBCM, MBM, Airbags Module/Airbags, and dash belong to the 2010 Motorhome.
This cute RV does have a 6.0L gas engine and 6-speed (6L90) transmission, 3.71 differential.
Curt XD hitch (18,000 Ib towing capacity), and HD brake controller were installed.
6 new (LT 235/85/16 All-Terrain) tires were installed and properly aligned by WW Tires in Brookings SD.
It was inspected by SD DOT, and new SD VIN: 1710010 was assigned to it, please note that you’ll get 2017 Assembled Vehicle SD title.
More than 50 pictures were posted on cars for sale and our website.
Below is the detail description about what was done:
Vehicle number 1: 2010 Chevrolet Express Cutaway Dually.
Work Description:
1) Disassemble the front cab and remove the dash and wire harnesses.
2) Take the remaining part of the motorhome (the floor, propane take, and generator) off.
3) Pressure wash the frame and then undercoat the whole frame.
4) Disassemble the front end (front bumper, core support, radiator, ac condenser, headlights, turn signal, fenders, etc.…).
5) Service the engine and the transmission (change/flash: engine oil and filter, air filter, transmission fluid and filter, engine coolant).
6) After cab of vehicle number 2 painted, it was installed on the frame of vehicle number 1.
7) HD Cattleman bumper was mounted, new headlights, turn signals, and grill were installed and the AC unit was recharged.
Vehicle number 2: 2003 GMC Savana G2500 Extended RV
Work Description:
1) Disassemble the front end (front bumper, core support, radiator, ac condenser, headlights, turn signal, fenders etc…).
2) Remove the whole dash (panel and board).
3) Separate the whole cab from the frame.
4) Install vehicle number 1 dash.
5) Install the cab on vehicle number 1 frame.
6) Remove the cab mounts, rear bumper brackets and spare carrier from vehicle number 2 frame and reattached them to vehicle number 1 frame.
7) Trim the extra length of vehicle number 1 frame and relocate the rear bumper.
8) Replace and mount six tires (LT 235/85/16 A/T) and aligned the vehicle, it was done by WW Tires in Brookings SD.
9) Two rear fenders, and two new Velvac OE towing mirrors were painted and installed.
11) Install an X-duty Curt hitch and brake control unit.
12) DVD/GPS/Backup camera were installed and wire harnessed were inspected by a certified Electric Shop, Nielsen’s Electric, in Brookings SD.
Our business is a family owned and operated. We are specialized in high quality heavy duty trucks that are 100% RUST FREE. We bring the best trucks in the southern and western states to SD, and most of them were never seen snow before, so shop with confidence.
If you are looking for something that we don"t have in our lot, please fee free to let us know and we could find it for you with a very competitive price. When we buy our vehicles, they will go through a multi-point inspection, and anything needs to be fixed we get it done before listing the vehicles.
When you shop, please check our maintenance list of each vehicle that was listed on our website.
Star Motors
300 32nd Ave
Brookings, SD 57006
We are located on the east side of 32nd ave, just across the street from Daktronics, around 50 mile north of Sioux Falls SD, at exit 132 on the east side of interstate 29.
Office: 605-691-0901
Cell: 605-651-2271
A frame, powertrain, suspensions, and differential, wire harnesses, dashboard, modules, etc. . out of 2010 Chevrolet Express Cutaway Dually (159" WB) having 19k mile and a RV body out of a 2003 GMC Savana 2500 RV extended cab (155"" WB) having 42k mile. Everything under the cabin including wire harnesses, ECM, EBCM, MBM, Airbags Module/Airbags, and dash belong to the 2010 Motorhome.
This cute RV does have a 6.0L gas engine and 6-speed (6L90) transmission, 3.71 differential.
Curt XD hitch (18,000 Ib towing capacity), and HD brake controller were installed.
6 new (LT 235/85/16 All-Terrain) tires were installed and properly aligned by WW Tires in Brookings SD.
It was inspected by SD DOT, and new SD VIN: 1710010 was assigned to it, please note that you’ll get 2017 Assembled Vehicle SD title.
More than 50 pictures were posted on cars for sale and our website.
Below is the detail description about what was done:
Vehicle number 1: 2010 Chevrolet Express Cutaway Dually.
Work Description:
1) Disassemble the front cab and remove the dash and wire harnesses.
2) Take the remaining part of the motorhome (the floor, propane take, and generator) off.
3) Pressure wash the frame and then undercoat the whole frame.
4) Disassemble the front end (front bumper, core support, radiator, ac condenser, headlights, turn signal, fenders, etc.…).
5) Service the engine and the transmission (change/flash: engine oil and filter, air filter, transmission fluid and filter, engine coolant).
6) After cab of vehicle number 2 painted, it was installed on the frame of vehicle number 1.
7) HD Cattleman bumper was mounted, new headlights, turn signals, and grill were installed and the AC unit was recharged.
Vehicle number 2: 2003 GMC Savana G2500 Extended RV
Work Description:
1) Disassemble the front end (front bumper, core support, radiator, ac condenser, headlights, turn signal, fenders etc…).
2) Remove the whole dash (panel and board).
3) Separate the whole cab from the frame.
4) Install vehicle number 1 dash.
5) Install the cab on vehicle number 1 frame.
6) Remove the cab mounts, rear bumper brackets and spare carrier from vehicle number 2 frame and reattached them to vehicle number 1 frame.
7) Trim the extra length of vehicle number 1 frame and relocate the rear bumper.
8) Replace and mount six tires (LT 235/85/16 A/T) and aligned the vehicle, it was done by WW Tires in Brookings SD.
9) Two rear fenders, and two new Velvac OE towing mirrors were painted and installed.
11) Install an X-duty Curt hitch and brake control unit.
12) DVD/GPS/Backup camera were installed and wire harnessed were inspected by a certified Electric Shop, Nielsen’s Electric, in Brookings SD.
Our business is a family owned and operated. We are specialized in high quality heavy duty trucks that are 100% RUST FREE. We bring the best trucks in the southern and western states to SD, and most of them were never seen snow before, so shop with confidence.
If you are looking for something that we don"t have in our lot, please fee free to let us know and we could find it for you with a very competitive price. When we buy our vehicles, they will go through a multi-point inspection, and anything needs to be fixed we get it done before listing the vehicles.
When you shop, please check our maintenance list of each vehicle that was listed on our website.
Star Motors
300 32nd Ave
Brookings, SD 57006
We are located on the east side of 32nd ave, just across the street from Daktronics, around 50 mile north of Sioux Falls SD, at exit 132 on the east side of interstate 29.
Office: 605-691-0901
Cell: 605-651-2271