Fingerlakes mini farrier trailer. TONS of EXTRAS!! Barely used! (2015)
Sale price: US $9,999.00 Make an Offer
| Condition: | Used | Model Year: | 2015 |
| Hitch Type: | Bumper Pull | Trailer Shape: | V-Nosed |
| Enclosed Trailer: | Yes |
Bealeton, Virginia, United States
Vehicle description
2015 Fingerlakes "mini" farrier trailer with TONS of extras! Don"t let the year fool you! I only had this trailer on the road for about 8 months. I purchased the trailer new in 2017 from a local dealer who had it sitting on their lot for a while. Less than a year after purchasing the trailer, I retired for health reasons and it has been sitting since then. The only major flaws are a couple of dents in the tongue compartment from a muddy pinch I got myself into. I would highly recommend replacing the tires - they are holding air and look good, but with all the sitting, I would not trust them. The adhesive on some the door seals is also coming loose and will need to be fixed.
Lights and brakes were all working when I tested them in August of this year. I do not have a title as I never registered it. I do have a certificate of origin from Fingerlakes in my name and I will obviously provide a bill of sale. I can have bill of sale notarized if need be. This is sufficient for titling and registering the trailer in VA, but please check with your DMV if you are in another state and let me know if there is additional paperwork that you need
Trailer comes with the following features installed:
-Shoe rack with bottom drawer
-Two vertical drawer sets
-Slide out drill press mount with drawer and two drill presses - both in excellent working order
-Swing out forge mount with two burner, dual control Forgemaster forge. Liner is in OK condition but may need to be replaced in the near future. Hoses to tongue compartment where propane tanks are located are all included and intact.
- Two propane tanks and diamond plate holders
- Drop down double baldor mount with baldor grinder and buffer installed - both in excellent working order.
- Extension cord reel, built in power strips and switches
- Roof mounted pad rack
- Fan mount and fan
- Swing out anvil mount. I have a plate for it that fits the 100lb scott anvil if you want it.
Additional, unmounted items include:
- 100lb scott anvil. I got it used and was already resurfaced once by Scott himself. It"s been a bit abused since I retired - it is certainly useable but needs a good clean up
- Fingerlakes aluminum tool holder, sanding block holder, hoof jack holder
- Full size spare and matching wheel
- Many, many hand tools - some in near perfect condition, others in need of a good deal of TLC. I have too many of these to list, but you are welcome to take what you want. Tongs, Nippers, Punches, hammers etc. These include items by GE, Nordic, Distal steel, MFC, St. Croix etc - likely worth upwards of 2k new.
- A small selection of steel and alumin horseshoes. This is definitely a random and mismatched assortment, but yours if you want any of it.
Thank you so much for taking a look! If you have any questions, I will get back to you as soon as I can!
Lights and brakes were all working when I tested them in August of this year. I do not have a title as I never registered it. I do have a certificate of origin from Fingerlakes in my name and I will obviously provide a bill of sale. I can have bill of sale notarized if need be. This is sufficient for titling and registering the trailer in VA, but please check with your DMV if you are in another state and let me know if there is additional paperwork that you need
Trailer comes with the following features installed:
-Shoe rack with bottom drawer
-Two vertical drawer sets
-Slide out drill press mount with drawer and two drill presses - both in excellent working order
-Swing out forge mount with two burner, dual control Forgemaster forge. Liner is in OK condition but may need to be replaced in the near future. Hoses to tongue compartment where propane tanks are located are all included and intact.
- Two propane tanks and diamond plate holders
- Drop down double baldor mount with baldor grinder and buffer installed - both in excellent working order.
- Extension cord reel, built in power strips and switches
- Roof mounted pad rack
- Fan mount and fan
- Swing out anvil mount. I have a plate for it that fits the 100lb scott anvil if you want it.
Additional, unmounted items include:
- 100lb scott anvil. I got it used and was already resurfaced once by Scott himself. It"s been a bit abused since I retired - it is certainly useable but needs a good clean up
- Fingerlakes aluminum tool holder, sanding block holder, hoof jack holder
- Full size spare and matching wheel
- Many, many hand tools - some in near perfect condition, others in need of a good deal of TLC. I have too many of these to list, but you are welcome to take what you want. Tongs, Nippers, Punches, hammers etc. These include items by GE, Nordic, Distal steel, MFC, St. Croix etc - likely worth upwards of 2k new.
- A small selection of steel and alumin horseshoes. This is definitely a random and mismatched assortment, but yours if you want any of it.
Thank you so much for taking a look! If you have any questions, I will get back to you as soon as I can!