Carry-On (2012)
Sale price: US $1,100.00 Make an Offer
| Condition: | Used | Year: | 2012 |
| Make: | Carry-On | Carrying Capacity (lbs.): | 2,990 |
| Enclosed Trailer: | No |
Marysville, Ohio, United States
Vehicle description
This is a used one owner 2012 Carry-On 6" x 12" trailer and unused spare tire. Please inspect pictures closely as there is some minor paint chipping from use. There is some light rust as well from outside storage. The rear driver side trailer gate spring pin (there is one on each side for holding rear gate up) has been replaced. The passenger side amber wheel fender lens is cracked however, I have a replacement lens. All lights are incandescent and work.
Note: 1.) Pictures were taken shortly after it had rained. 2.) Buyer pickup only. Pressure treated wood floor boards. 12 D-Ring tie down attachments. Forward side rails are removable and can be used for side loading. Example: ATV etc. Side rails are kept in place with springs/rod-hooks when stored and not used for loading. Rear main ramp gate will fold flat onto the trailer wood floor when hauling longer loads. Rear gate hinges have zirk fittings for greasing as needed. 2-inch ball-hitch coupler and safety chains. 4-way straight connector wiring. Spare tire as pictured included and unused. 2,990 pound GVWR.
Information as noted from manufacturers" site:
Features
3" Channel A-Frame Tongue 3" x 2" x 3/16" Angle Main Frame 2" x 2" x 1/8" Angle Top Rail 1.5" x 1.5" x 1/8" Angle Uprights 2" A-Frame Coupler with Safety Chains 2,000 lb. Rated Top Wind Jack 3,500 lb. Rated Idler Axle 3-Leaf Springs ST205x15 Tire and Wheel Assemblies White Mod Wheels Steel Round Fender with Back Treated Wood Floor 72" W x 49" H Rear Ramp Gate Specifications
14" W X 57" H Side Mount Ramps Empty Weight: 900 Payload Capacity: 2,090 Tire Size: 15" Gate Width and Length: 72" x 49" Overall Length: 198" Overall Width: 96" Deck Length: 144" Deck Width: 76"
Note: 1.) Pictures were taken shortly after it had rained. 2.) Buyer pickup only. Pressure treated wood floor boards. 12 D-Ring tie down attachments. Forward side rails are removable and can be used for side loading. Example: ATV etc. Side rails are kept in place with springs/rod-hooks when stored and not used for loading. Rear main ramp gate will fold flat onto the trailer wood floor when hauling longer loads. Rear gate hinges have zirk fittings for greasing as needed. 2-inch ball-hitch coupler and safety chains. 4-way straight connector wiring. Spare tire as pictured included and unused. 2,990 pound GVWR.
Information as noted from manufacturers" site:
Features
3" Channel A-Frame Tongue 3" x 2" x 3/16" Angle Main Frame 2" x 2" x 1/8" Angle Top Rail 1.5" x 1.5" x 1/8" Angle Uprights 2" A-Frame Coupler with Safety Chains 2,000 lb. Rated Top Wind Jack 3,500 lb. Rated Idler Axle 3-Leaf Springs ST205x15 Tire and Wheel Assemblies White Mod Wheels Steel Round Fender with Back Treated Wood Floor 72" W x 49" H Rear Ramp Gate Specifications
14" W X 57" H Side Mount Ramps Empty Weight: 900 Payload Capacity: 2,090 Tire Size: 15" Gate Width and Length: 72" x 49" Overall Length: 198" Overall Width: 96" Deck Length: 144" Deck Width: 76"