Ford F-450 4WD ALTEC Bucket Truck 40' Working Height 350 lb capacity (2011)
Sale price: US $35,000.00 Make an Offer
| Condition: | Used | Year: | 2011 |
| VIN : | 1FDUF4HT5BEC25862 | Mileage: | 134816 |
| Options: | -- | Fuel Type: | Diesel |
| Interior Color: | Gray | For Sale By: | Private Seller |
| Body Type: | -- | Warranty: | Unspecified |
| Suspension Type: | Spring | Model: | F-450 |
| Transmission: | Automatic | Exterior Color: | White |
| Engine Make: | Ford | Power Options: | -- |
| Make: | Ford | Vehicle Title: | Clean |
| Drive Type: | -- | Engine: | -- |
| Transmission Type: | Automatic |
Fishersville, Virginia, United States
Vehicle description
2011 Ford F-450 4WD ALTEC Bucket Truck
Mileage 134816
Good condition, ready to work, inspected by Altec September 2020.
There are a couple of small cracks near the center of the windshield but it passed Virginia state safety inspection.
There are a few dents in the hood, looks like hail damage.
120V outlet on the platform is not working, we will investigate this. The inverter is working if you plug it at the unit.
Engine was replaced due to failure, not sure when or at what mileage.
6.7 L Diesel
Altec AT235 lift
STANDARD FEATURES: • Non-Insulated Aerial Device • All Steel Boom Construction • Hydraulically Extended Boom • Noncontinuous Rotation • Engine Start/Stop at Upper and Lower Controls • Open Center Hydraulic System • 120 VAC Circuit in Booms with Outlets at the Platform • Can Mount on a 15,000 lb (6804 kg) GVWR Chassis, 60 in(1524 mm) CA or 84 in (2134 mm) CA
Ground to Bottom of Platform* —End-Mounted Platform 35.3 ft 10.7 m (@ reach from centerline) 8.0 ft 2.4 m Side-Mounted Platform 35.0 ft 10.7 m (@ reach from centerline) 6.5 ft 2.0 m
Working Height* —End-Mounted Platform 40.3 ft 12.3 m Side-Mounted Platform 40.3 ft 12.3 m
Maximum Reach from Centerlineof Rotation to Lip of Platform —End-Mounted Platform 26.5 ft 8.1 m Side-Mounted Platform 24.9 ft 7.6 m
Stowed Travel Height, approximate* 10.9 ft 3.3 m
Platform Capacity —End-Mounted 350 lb 159 kg Side-Mounted 350 lb 159 kg
Articulating Arm 0° to 90°
Boom Articulation -25° to 78°
Rotation 370° Noncontinuous
Mileage 134816
Good condition, ready to work, inspected by Altec September 2020.
There are a couple of small cracks near the center of the windshield but it passed Virginia state safety inspection.
There are a few dents in the hood, looks like hail damage.
120V outlet on the platform is not working, we will investigate this. The inverter is working if you plug it at the unit.
Engine was replaced due to failure, not sure when or at what mileage.
6.7 L Diesel
Altec AT235 lift
STANDARD FEATURES: • Non-Insulated Aerial Device • All Steel Boom Construction • Hydraulically Extended Boom • Noncontinuous Rotation • Engine Start/Stop at Upper and Lower Controls • Open Center Hydraulic System • 120 VAC Circuit in Booms with Outlets at the Platform • Can Mount on a 15,000 lb (6804 kg) GVWR Chassis, 60 in(1524 mm) CA or 84 in (2134 mm) CA
Ground to Bottom of Platform* —End-Mounted Platform 35.3 ft 10.7 m (@ reach from centerline) 8.0 ft 2.4 m Side-Mounted Platform 35.0 ft 10.7 m (@ reach from centerline) 6.5 ft 2.0 m
Working Height* —End-Mounted Platform 40.3 ft 12.3 m Side-Mounted Platform 40.3 ft 12.3 m
Maximum Reach from Centerlineof Rotation to Lip of Platform —End-Mounted Platform 26.5 ft 8.1 m Side-Mounted Platform 24.9 ft 7.6 m
Stowed Travel Height, approximate* 10.9 ft 3.3 m
Platform Capacity —End-Mounted 350 lb 159 kg Side-Mounted 350 lb 159 kg
Articulating Arm 0° to 90°
Boom Articulation -25° to 78°
Rotation 370° Noncontinuous