International 4300 (2006)
Sale price: US $100.00 Make an Offer
| Used |
| “ Truck has been inspected and serviced at our facility and is ready to go into the work field from our shop. ” |
| Year: | 2006 | VIN : | 1HTMMAAN26H306980 |
| Mileage: | 150486 | Engine Horsepower: | 245 |
| Make: | International | Fuel Type: | Diesel |
| Model: | 4300 | For Sale By: | Dealer |
| Class: | Class 7 (26,001-33,000 lbs.) | Transmission Type: | Automatic |
| Transmission Speeds: | 5 Speed | Vehicle Title: | Clear |
| Suspension Type: | Spring | Number of Axles: | Single |
| Power Options: | Air Conditioning, Cruise Control | Engine Make: | International |
Mustang, Oklahoma, United States
Vehicle description
2006 International 4300
Powered by DT466 with 150,486 miles
245HP @ 2300RPM and 620 lbtq @ 1400RPM
Auto Allison 5 speed transmission
Driver bucket seat and passenger bench
Strobe lights
A/C and heat
AM/FM radio
Air horn
Steering wheel tilt
Windshield washer
Cruise control
12"6"" travel height
Over head storage
Wing windows
Trailer air brakes
Right side 50 gallon fuel tank
Tires have 50% tread
Wheel chalk cubbied
Outrigger pad storage
Cab guard
Pintle hitch Equipped with Altec AA755L
Articulating Insulated Boom
55ft Platform height
60ft working height
2 man bucket with 700lb weight limit
Material handler and jib with 2,000lb capacity
Hydraulic jib functions
Start/Stop and DC back up at upper and lower conrtrols
Hydraulic auxillary winch control at lower controls
2 sets of hydraulic tool hook ups at bucket
FRESHLY INSPECTED AND DIELECTRIC TESTED
THIS TRUCK HAS HAD A FULL "ANNUAL INSPECTION" (AS OUTLINED IN ANSI92.2) BY A CERTIFIED BUCKET TRUCK INSPECTOR, CERTIFIED BY THE CRANE INSTITUTE OF AMERICA, AND FULLY COMPLIES WITH OSHA AND ANSI STANDARDS. MANY DEALERS SAY THEY "INSPECT" THE BOOMS, BUT THERE IS A BIG DIFFERENCE HERE, THIS IS A VALID ANSI ANNUAL INSPECTION. WITH US YOU WILL GET THE PAPERWORK REQUIRED IF OSHA INSPECTS YOU, AND AS REQUIRED BY SO MANY JOBSITES IN TODAY"S WORKPLACE. THIS IS A VALUABLE ADDED FEATURE.
CALL FOR MORE INFORMATION
OR GO TO WWW.BUCKETTRUCKRANCH.COM
Fresh annual ANSI boom inspection and dielectric test, good for 1 year, done while in our possession
Powered by DT466 with 150,486 miles
245HP @ 2300RPM and 620 lbtq @ 1400RPM
Auto Allison 5 speed transmission
Driver bucket seat and passenger bench
Strobe lights
A/C and heat
AM/FM radio
Air horn
Steering wheel tilt
Windshield washer
Cruise control
12"6"" travel height
Over head storage
Wing windows
Trailer air brakes
Right side 50 gallon fuel tank
Tires have 50% tread
Wheel chalk cubbied
Outrigger pad storage
Cab guard
Pintle hitch Equipped with Altec AA755L
Articulating Insulated Boom
55ft Platform height
60ft working height
2 man bucket with 700lb weight limit
Material handler and jib with 2,000lb capacity
Hydraulic jib functions
Start/Stop and DC back up at upper and lower conrtrols
Hydraulic auxillary winch control at lower controls
2 sets of hydraulic tool hook ups at bucket
FRESHLY INSPECTED AND DIELECTRIC TESTED
THIS TRUCK HAS HAD A FULL "ANNUAL INSPECTION" (AS OUTLINED IN ANSI92.2) BY A CERTIFIED BUCKET TRUCK INSPECTOR, CERTIFIED BY THE CRANE INSTITUTE OF AMERICA, AND FULLY COMPLIES WITH OSHA AND ANSI STANDARDS. MANY DEALERS SAY THEY "INSPECT" THE BOOMS, BUT THERE IS A BIG DIFFERENCE HERE, THIS IS A VALID ANSI ANNUAL INSPECTION. WITH US YOU WILL GET THE PAPERWORK REQUIRED IF OSHA INSPECTS YOU, AND AS REQUIRED BY SO MANY JOBSITES IN TODAY"S WORKPLACE. THIS IS A VALUABLE ADDED FEATURE.
CALL FOR MORE INFORMATION
OR GO TO WWW.BUCKETTRUCKRANCH.COM
Fresh annual ANSI boom inspection and dielectric test, good for 1 year, done while in our possession