Subaru WRX STI (2004)
Sale price: US $15,400.00 Make an Offer
| Condition: | Used | Year: | 2004 |
| VIN : | JF1GD70634L520591 | Mileage: | 150,000 |
| Number of Cylinders: | 4 | Make: | Subaru |
| Transmission: | Manual | Model: | WRX |
| Body Type: | Sedan | Trim: | STI |
| Warranty: | Vehicle does NOT have an existing warranty | Engine: | 2.5L Turbo charge |
| Vehicle Title: | Clear | Drive Type: | AWD |
| Fuel Type: | Gasoline | For Sale By: | Private Seller |
| Exterior Color: | Black | Disability Equipped: | No |
| Interior Color: | Black/Blue | Drive Side: | Left-hand drive |
Saint Cloud, Florida, United States
Vehicle description
Selling my 04 Subaru Impreza WRX STI. The body has 150,000 miles but the engine has less than 3,000 Miles. The engine is stock and fully built with performance parts that make it reliable and stronger. Equipped with Kicker Audio System and double dim touch screen. Receipts of all parts and modifications can be provided and will be listed below.
List of parts/modifications ( actual receipts will be provided)
Real Street Performance:
1. GSC Intake Valves Subaru EJ205 WRX Sti 36mm
2. GSC EXhaust Valves Subaru EJ205 EJ257 WRX STI 32mm
3. Single Beehive Spring and Titanium Retainer
4. GSC S3 282/282 Billet Cams Subaru EJ257 Impreza WRX STI 04-07
5. Darton Dry Sleeves Subaru EJ257 Impreza STI 2.5L
6. Arp Case Bolt Kit Main Subaru Impreza WRX STI EJ205 EJ257
7. Arp Case Bolt Kit Main Subaru Impreza WRX STI EJ205 EJ257
8. Arp CA625 + Head Stud Kit Subaru Impreza WRX STI EJ205 EJ257
9. Manley Turbo Tuff I-Beam Rods Subaru EJ205 EJ257 WRX Sti
10. GSC S2 282/280 Billet Cams Subaru EJ257 Impreza WRX STI
11. CP upgraded pin .200 wall Subaru
12. GSC S3 282/282 Billet Cams Subaru EJ257 Impreza WRX STI
13. CP Forged Pistons Subaru EJ257 WRX STI 2.5L 99.5mm 9.0:1
14. Manley H-Tuff H-Beam HD Rod Set Subaru EJ20/EJ25
15. ACL HX Race Main Bearing SET Subaru EJ205 EJ255 EJ257 Impreza WRX STI
16.ACL HX Race Rod BEarings EJ205 EJ255 EJ257 Subaru Impreza WRX STI
MazWorx:
1. Hot tank/Clean
2. Stage 2 Port and Polish (per cylinder), open port and bowl, match to valve seats
3. Remove, Reinstall, Ream Valve Guide (per guide)
4. Valve Job, Race (per valve), multi angle for oversized valves
5. Assemble Head (per valve)
6. Set Valve Lash (per valve)
7. Resurface heads, pair (parallel)
8. GSC Power-Division Exhaust Valve Guide, with depth stopper, EJ
9. GSC Power-Division Intake Valve Guide with depth stoopper, EJ
10. Supertech Ehaust Valve Seal, Toyota 2JZ
11. Supertech Intake Valve Seal, Toyota 2JZ
12. Remove/Drill/Tap Oil Port Plugs, EJ Block, Remove/Tap Hole on RH, 1/8"NPT
13. Sand Blast Block, Alum
14. Sleeve Install, darton Dry
15. Step Deck, V/Opposed
16. Resize Cylinder (over 0.020")
17. Use Torque Plate During Honing
18. Resize Line Bore, 4 Cyl
19. Pipe Plug, 1/8" NPT, EJ Black Machining Stage 2
List of parts/modifications ( actual receipts will be provided)
Real Street Performance:
1. GSC Intake Valves Subaru EJ205 WRX Sti 36mm
2. GSC EXhaust Valves Subaru EJ205 EJ257 WRX STI 32mm
3. Single Beehive Spring and Titanium Retainer
4. GSC S3 282/282 Billet Cams Subaru EJ257 Impreza WRX STI 04-07
5. Darton Dry Sleeves Subaru EJ257 Impreza STI 2.5L
6. Arp Case Bolt Kit Main Subaru Impreza WRX STI EJ205 EJ257
7. Arp Case Bolt Kit Main Subaru Impreza WRX STI EJ205 EJ257
8. Arp CA625 + Head Stud Kit Subaru Impreza WRX STI EJ205 EJ257
9. Manley Turbo Tuff I-Beam Rods Subaru EJ205 EJ257 WRX Sti
10. GSC S2 282/280 Billet Cams Subaru EJ257 Impreza WRX STI
11. CP upgraded pin .200 wall Subaru
12. GSC S3 282/282 Billet Cams Subaru EJ257 Impreza WRX STI
13. CP Forged Pistons Subaru EJ257 WRX STI 2.5L 99.5mm 9.0:1
14. Manley H-Tuff H-Beam HD Rod Set Subaru EJ20/EJ25
15. ACL HX Race Main Bearing SET Subaru EJ205 EJ255 EJ257 Impreza WRX STI
16.ACL HX Race Rod BEarings EJ205 EJ255 EJ257 Subaru Impreza WRX STI
MazWorx:
1. Hot tank/Clean
2. Stage 2 Port and Polish (per cylinder), open port and bowl, match to valve seats
3. Remove, Reinstall, Ream Valve Guide (per guide)
4. Valve Job, Race (per valve), multi angle for oversized valves
5. Assemble Head (per valve)
6. Set Valve Lash (per valve)
7. Resurface heads, pair (parallel)
8. GSC Power-Division Exhaust Valve Guide, with depth stopper, EJ
9. GSC Power-Division Intake Valve Guide with depth stoopper, EJ
10. Supertech Ehaust Valve Seal, Toyota 2JZ
11. Supertech Intake Valve Seal, Toyota 2JZ
12. Remove/Drill/Tap Oil Port Plugs, EJ Block, Remove/Tap Hole on RH, 1/8"NPT
13. Sand Blast Block, Alum
14. Sleeve Install, darton Dry
15. Step Deck, V/Opposed
16. Resize Cylinder (over 0.020")
17. Use Torque Plate During Honing
18. Resize Line Bore, 4 Cyl
19. Pipe Plug, 1/8" NPT, EJ Black Machining Stage 2