Ram SRT 1500 700 HP+ 12 VALVE CUMMINS SWAPPED!!! (2003)
Sale price: US $19,000.00 Make an Offer
| Condition: | Used | Year: | 2003 |
| VIN : | 1D7HA16D73J664199 | Mileage: | 00000 |
| Number of Cylinders: | 6 | Vehicle Title: | Clean |
| Fuel Type: | Diesel | Model: | Ram 1500 |
| Drive Type: | RWD | Make: | Dodge |
| Transmission: | Automatic |
Ada, Michigan, United States
Vehicle description
2003 Ram SRT Build Engine: Cummins 12V
• Block, pistons, rods, bearings.
• Cam: Maxspool 194/215, welded on cam gear, new cam bearing
• New gaskets throughout
• KDP addressed
• Common Rail lifters
• Maxspool HD Push Rods
Cylinder Head:
• O-ringed by Central Florida Machine
• 16 plus hours of hand porting to match larger valves
• .100” over Mountain Performance intake exhaust valves and seats
• BD #110 valve springs
• New valve seals
• ARP 425 head studs
• Powder coated valve cover with IH breather cover plumbed with CAI
Air:
• Pusher Low Mount Compound System; HX35/S475 with powder coated compressor housings
• Pusher Mega Twin Intake System
• Modified Factory intercooler with 3.5” inlet/outlet
• 5” exhaust with muffler
Fuel:
• Maxed and balanced pump to 440CC at 2500RPM
• 024 delivery valves
• 4000RPM governor springs
• DAP 7x.0115 SAC Injectors
• Duel feed fuel supply lines
• FASS Platinum fuel pump
• FASS sump
• Tork Tech overflow valve
• Timed to 18 degrees
Transmission: 47RH
• Revmax billet flexplate
• Revmax stage 5 convertor
• Revmax valve body
• Revmax billet servos
• Revmax billet apply lever and strut
• Revmax billet bands
• Alto Red clutches and Kolene steel
• Suncoast billet input and intermediate shafts
• Mag-Hytec deep pan
Driveline:
• 22” SRT10 wheels powder coated “anodized bronze”
• 305/45/22 Nitto 420
• Custom steel drive shaft
• Billet yoke on axle pinion
• Detroit locker
• 3.21:1 Yukon ring and pinion
• New bearings and seals in rear end
Suspension:
• Overload lead springs removed
• 2” drop shackles
• Caltrac traction bars
Brakes:
• Power Stop powder coated performance calipers front and rear
• Power Stop drilled and slotted rotors front and rear
Body:
• Cervini’s SRT10 hood
• 2006+ Ram OEM sport front fenders
• 2006+ Ram OEM sport bumper cover
• 2006+ Ram custom-built grill
• Tinted head/tail and amber fog lights
• Roll pan with exhaust cut out
• Painted single stage black 1/2/18
• New windshield prior to paint
• Windshield tinted with ceramic tint Feb 2018
• Side windows tinted Feb 2018
• New side window seals (lower)
Interior:
• Carpet removed and steam cleaned
• Additional insulation installed under carpet
• Heater core and evaporator replaced
• New dash March 2018
Notable accessories:
• Edge CTS2 monitor with three EGT sensors, three boost sensors, three low temp sensors
• Custom 6061 aluminum coolant overflow tank powder coated to match valve covers and compressor housings
• Husky floor mats
• Interstate AGM battery
• Track Rims/Tires
• Forgeline Rims available for extra
https:/ www.youtube.com/watch?v=mTPfnkaOdO0
Questions?
Trade?
• Block, pistons, rods, bearings.
• Cam: Maxspool 194/215, welded on cam gear, new cam bearing
• New gaskets throughout
• KDP addressed
• Common Rail lifters
• Maxspool HD Push Rods
Cylinder Head:
• O-ringed by Central Florida Machine
• 16 plus hours of hand porting to match larger valves
• .100” over Mountain Performance intake exhaust valves and seats
• BD #110 valve springs
• New valve seals
• ARP 425 head studs
• Powder coated valve cover with IH breather cover plumbed with CAI
Air:
• Pusher Low Mount Compound System; HX35/S475 with powder coated compressor housings
• Pusher Mega Twin Intake System
• Modified Factory intercooler with 3.5” inlet/outlet
• 5” exhaust with muffler
Fuel:
• Maxed and balanced pump to 440CC at 2500RPM
• 024 delivery valves
• 4000RPM governor springs
• DAP 7x.0115 SAC Injectors
• Duel feed fuel supply lines
• FASS Platinum fuel pump
• FASS sump
• Tork Tech overflow valve
• Timed to 18 degrees
Transmission: 47RH
• Revmax billet flexplate
• Revmax stage 5 convertor
• Revmax valve body
• Revmax billet servos
• Revmax billet apply lever and strut
• Revmax billet bands
• Alto Red clutches and Kolene steel
• Suncoast billet input and intermediate shafts
• Mag-Hytec deep pan
Driveline:
• 22” SRT10 wheels powder coated “anodized bronze”
• 305/45/22 Nitto 420
• Custom steel drive shaft
• Billet yoke on axle pinion
• Detroit locker
• 3.21:1 Yukon ring and pinion
• New bearings and seals in rear end
Suspension:
• Overload lead springs removed
• 2” drop shackles
• Caltrac traction bars
Brakes:
• Power Stop powder coated performance calipers front and rear
• Power Stop drilled and slotted rotors front and rear
Body:
• Cervini’s SRT10 hood
• 2006+ Ram OEM sport front fenders
• 2006+ Ram OEM sport bumper cover
• 2006+ Ram custom-built grill
• Tinted head/tail and amber fog lights
• Roll pan with exhaust cut out
• Painted single stage black 1/2/18
• New windshield prior to paint
• Windshield tinted with ceramic tint Feb 2018
• Side windows tinted Feb 2018
• New side window seals (lower)
Interior:
• Carpet removed and steam cleaned
• Additional insulation installed under carpet
• Heater core and evaporator replaced
• New dash March 2018
Notable accessories:
• Edge CTS2 monitor with three EGT sensors, three boost sensors, three low temp sensors
• Custom 6061 aluminum coolant overflow tank powder coated to match valve covers and compressor housings
• Husky floor mats
• Interstate AGM battery
• Track Rims/Tires
• Forgeline Rims available for extra
https:/ www.youtube.com/watch?v=mTPfnkaOdO0
Questions?
Trade?