Fiat X-1/9 (1978)

Sale price: US $9,500.00 Make an Offer

Condition: Seller notes:
“ Start right up need tune ”
Year: 1978 VIN : 128as0081398
Mileage: 90,000 Transmission: Manual
Make: Fiat Body Type: Convertible
Model: X-1/9 Warranty: Vehicle does NOT have an existing warranty
Engine: Honda B20v Vehicle Title: Clear
Drive Type: RWD Fuel Type: Gasoline
For Sale By: Private Seller Exterior Color: Blue
Disability Equipped: No Interior Color: Black
Drive Side: Left-hand drive Number of Cylinders: 4

Newtown, Pennsylvania, United States

Vehicle description

1978 Fiat X-1/9 Dallara Highly modified race preped X-1/9. Has Dallara style fiberglass fender kit installed. Can be raced in SCCA XP or DM class. This car can pull a constant 1.5 lateral-G. the suspension springs are quite stiff for street driving. Powerplant is a highly modified Honda B-series swap. Engine block is freashly rebuilt and made 197whp with 131ftlb of torque in a car that weighs about 1900lbs. Suspension and rack and pinion is all rebuilt, modified, or upgraded with new bushings and joints. Front radious arms modified with heim joints. Knuckles upgraded to newer 1500 with new bearings and studs. G-Force Engineering strut conversion housings with Koni 8611 rebound/compression adjustable Dampers. G-Force Engineering camber plates. Ground control adjustable spring purches. Eibach springs 500/600lb. Whoa Brakes kit in front, with oversized two piece front rotors and Wilwood calipers. Stock 1500 front calipers moved to rear with slotted and crossdrilled rotors. Steal braided brake lines from VAS. Wilwood dual 3/4" master cyclinder setup with remote bias control. Wilwood polymatrix race pads in front and Porterfield R4-S race pads in rear. Honda clutch mastercylinder Two sets of Diamond racing wheels, 8x13" rear and 7x13" front. B20 with stock B16 vtec head. All new gaskets, seals, bearings, rings. B16vtec head is stock unworked with stock valves and stock b16vtec cams. Custom energy suspension urithane mounts Stock crank and rods machined/trued for ARP rod bolts. Pistons are12:1 PR3 style to work with the B16vtec cylinder head. cometic head gasket ARP head studs. PasswordJDM oil pan baffle installed in oil pan. H Custom 4-2-1 header for swap through a 2-1/2" muffler and pipe. Hondata S300 ECU. 8 gallon fuel cell located in bonnett with a Walbro 255L fuel pump. Light weight fly wheel. JDM SiR Transaxle with Quafe LSD unit
Car need tune

More Fiat Other for sale

US $500.00
US $14,000.00
US $100.00