Chevy Nova (1966)
Sale price: US $10,000.00 Make an Offer
| Condition: | Used | Year: | 1966 |
| VIN : | 116376w132737 | Mileage: | 250 |
| Model: | Nova | Number of Cylinders: | 8 |
| Vehicle Title: | Clean | Make: | Chevrolet |
Portland, Oregon, United States
Vehicle description
Meet Root of all Evil this a fully custom 1966 chevy nova. this car has been stripped of all it paint and fully retomoded. this car spent all its life in a garage so she was rust free from the start.
lets start with the body. the body was stripped of all its paint and under coating. it was mini tubed, the inside of the car was epoxied with PPG dp, all the body panels were fitted and gapped. The car was metal worked, trim holes were welded up. this car has less then a gal of body filler thru the whole car. it was then epoxied,body work and long blocking was done and then is was sprayed in ppg water base. The car then was cleared with ppg clear 3 coats wet sanded starting with 600 3 more coats were spayed and then wet sanded with 1000 to 5000 and polished. this car was painted in pieces so there is no tape lines, all of the flat painted areas were done in water base and then cleared in flat ppg clear. under the car was sand blasted treated with POR 15 seam sealed and tinited rapter bed liner to match the color the car was sprayed in. Body color start as a 2017 toyota color and then was Custom Mixed to add what I wanted.
The chassis All Heidts Pro G front end with power rack. Heidts 4 link. that is welded in place so all the supports are welded not boloted Strange ford 9" housing narrowed 2" each side, with strange 33 spline axels and big bearing housing with 373 eaton posi unit. Ride tech Coilovers with sring rate of 400 in the front and 200 in the rear. Wilwood 12.88 rotor with 6 piston caliper front and 12.88 rotor with 4 piston caliper rear for brakes
Motor & Trans 6.0 is out of a 2016 cop car it 4000 miles we took the motor apart and went thru it changed all it gaskets, took out the DOD and installed. comp stage 3 cam , lifters, push rods holley oil pan holley ls3 intake holley 48lb injuectors msd coil packs wegner custom Valve Covers wegner front drive with 200 amp alt mini torq starter, nick williams 102mm throttle body. custom built stainless Ultimate headers coated black with machined motor flange. all custom hand built stainless exhaust and borla mufflers. Bowler t56 magnum 6sp,quick time bell houseing, hydraulic master with stage 2 Monster Clutch.
All of the body wiring was done in painless performance. the motor harness is done by speartech lsx. all wiring was solder shrinked tubed, there are not butt connectors.Dakota digital hdx gauges, dakota digital heater controls, hidden wiper kit, vintage air, lokar DBW pedal, Ididit column, bowler touch and go keyless start with power locks, Nu-relic 4 window power window kit, with gt40 switch in the center console. cordeless phone charger. all led lights head lights cutom built the tail lights, turn lights all dakota digital led.
I can go on and on about the car but here is a list of parts hedits pro g front end hedits 4link strange rear end detroit speed hidden wipers custom built CNR Racing radiatior with spal brushless fans. vitage air with dakota digital contols Hydrtech braking hydro boost painless chassis harness speartech lsx motor harness lokar DBW pedal lokar sifter ring brother shift ball ring brothers billet batt shut offs ring broher clutch res. dakota didgital HDX gauges 2.5 borla mufflers all tig welded 2.5 403 stainless custom leather dash custom power seats out of a 2016 camaro Custom 19" american racing 3 pc wheels 19x8 fronts 19x12 rears Nitto nt01 tires 315 rear ricks custom built stainless fuel tank with a 400lp fuel pump eddie motorsports blac billet door handles Fesler black billet hood hinges dakota digital tail lights custom built 8000k head lights all the brake lines are all done in an style fittings wilwood braided rubber lines power rack Full custom dyied leather,brown is bomer style leather door panels ,custom pull handels. mini tubed titnted glass (not a film) side windows and back glass. ididit steering column bowler touch and go keyless touch button power locks custom center console cordless phone charger. apline deck 2 jl Audio W7ae 12 sub woofers Jl audio dash speakers jl audio c7 kick panel speakers 2 jl audio vx1000/1i 1 jl audio vx 800/8i Jl audio Twk-88 digital signal processor
There is alot to list the car dynoed out at 500hp to the wheels. There is close to 175,000 just in parts
some more photos and videos https:/ drive.google.com/drive/folders/1jJBY5PmtQ8DArblwh4s29WiukMxdb-Ae?usp=sharing
lets start with the body. the body was stripped of all its paint and under coating. it was mini tubed, the inside of the car was epoxied with PPG dp, all the body panels were fitted and gapped. The car was metal worked, trim holes were welded up. this car has less then a gal of body filler thru the whole car. it was then epoxied,body work and long blocking was done and then is was sprayed in ppg water base. The car then was cleared with ppg clear 3 coats wet sanded starting with 600 3 more coats were spayed and then wet sanded with 1000 to 5000 and polished. this car was painted in pieces so there is no tape lines, all of the flat painted areas were done in water base and then cleared in flat ppg clear. under the car was sand blasted treated with POR 15 seam sealed and tinited rapter bed liner to match the color the car was sprayed in. Body color start as a 2017 toyota color and then was Custom Mixed to add what I wanted.
The chassis All Heidts Pro G front end with power rack. Heidts 4 link. that is welded in place so all the supports are welded not boloted Strange ford 9" housing narrowed 2" each side, with strange 33 spline axels and big bearing housing with 373 eaton posi unit. Ride tech Coilovers with sring rate of 400 in the front and 200 in the rear. Wilwood 12.88 rotor with 6 piston caliper front and 12.88 rotor with 4 piston caliper rear for brakes
Motor & Trans 6.0 is out of a 2016 cop car it 4000 miles we took the motor apart and went thru it changed all it gaskets, took out the DOD and installed. comp stage 3 cam , lifters, push rods holley oil pan holley ls3 intake holley 48lb injuectors msd coil packs wegner custom Valve Covers wegner front drive with 200 amp alt mini torq starter, nick williams 102mm throttle body. custom built stainless Ultimate headers coated black with machined motor flange. all custom hand built stainless exhaust and borla mufflers. Bowler t56 magnum 6sp,quick time bell houseing, hydraulic master with stage 2 Monster Clutch.
All of the body wiring was done in painless performance. the motor harness is done by speartech lsx. all wiring was solder shrinked tubed, there are not butt connectors.Dakota digital hdx gauges, dakota digital heater controls, hidden wiper kit, vintage air, lokar DBW pedal, Ididit column, bowler touch and go keyless start with power locks, Nu-relic 4 window power window kit, with gt40 switch in the center console. cordeless phone charger. all led lights head lights cutom built the tail lights, turn lights all dakota digital led.
I can go on and on about the car but here is a list of parts hedits pro g front end hedits 4link strange rear end detroit speed hidden wipers custom built CNR Racing radiatior with spal brushless fans. vitage air with dakota digital contols Hydrtech braking hydro boost painless chassis harness speartech lsx motor harness lokar DBW pedal lokar sifter ring brother shift ball ring brothers billet batt shut offs ring broher clutch res. dakota didgital HDX gauges 2.5 borla mufflers all tig welded 2.5 403 stainless custom leather dash custom power seats out of a 2016 camaro Custom 19" american racing 3 pc wheels 19x8 fronts 19x12 rears Nitto nt01 tires 315 rear ricks custom built stainless fuel tank with a 400lp fuel pump eddie motorsports blac billet door handles Fesler black billet hood hinges dakota digital tail lights custom built 8000k head lights all the brake lines are all done in an style fittings wilwood braided rubber lines power rack Full custom dyied leather,brown is bomer style leather door panels ,custom pull handels. mini tubed titnted glass (not a film) side windows and back glass. ididit steering column bowler touch and go keyless touch button power locks custom center console cordless phone charger. apline deck 2 jl Audio W7ae 12 sub woofers Jl audio dash speakers jl audio c7 kick panel speakers 2 jl audio vx1000/1i 1 jl audio vx 800/8i Jl audio Twk-88 digital signal processor
There is alot to list the car dynoed out at 500hp to the wheels. There is close to 175,000 just in parts
some more photos and videos https:/ drive.google.com/drive/folders/1jJBY5PmtQ8DArblwh4s29WiukMxdb-Ae?usp=sharing