Replica/Kit Makes Shelby Cobra (1965)
Sale price: US $42,500.00 Make an Offer
| Condition: | Used | Year: | 1965 |
| VIN : | AA9BMAAHV31CN180B | Mileage: | 9,500 |
| Interior Color: | Black | Make: | Replica/Kit Makes |
| Number of Cylinders: | 8 | Model: | Shelby |
| Transmission: | Manual | Trim: | Cobra |
| Body Type: | Convertible | Engine: | 427 |
| Warranty: | Vehicle does NOT have an existing warranty | Drive Type: | 5 Speed Manual |
| Vehicle Title: | Clear | For Sale By: | Private Seller |
| Exterior Color: | Silver | Drive Side: | Left-hand drive |
Chandler, Arizona, United States
Vehicle description
10.46 @ 131 mph in the 1/4 Mile! Titled as a 1965 Ford Offers below $40K will not be responded to so please don"t waste my time. YOUTUBE Walk-A-Round with Engine running: https:/ youtu.be/2SUVirDnFfk (Please do not offer trades or a lower price) You are looking at a 600+HP Beast with a BRAND NEW 427 Crate Motor [ M-6007-Z427AFT/ART] with less than 500 miles on it! T5 Transmission was rebuild less than 90 days ago. Brand new 780 CFM HR-Series Slayer Carb. The vehicle has been meticulously maintained inside and out and just went through a complete nuts and bolts tune up. Tires are new all around. Side mirror was replaced [the original one was showing signs of wear so I tossed it] The slave cylinder has been upgraded to the latest Wilwood model as has the clutch master cylinder. She goes through the gears like a dream and is the envy of the neighborhood. Need to make room for my ’70 Hemi ‘cuda project! You can call me at 480-773-0908. The Title is with me and the registration is good through 2022. Motor Specs: Technical information and specifications:
* 600 hp at 6,500 rpm
* 558 lbs.-ft. of torque at 5,000 rpm
* Engine type: 351 based small block Ford
* 4.125 in. bore x 4.00 in. stroke
* Ford Performance aluminum 4-bolt main block (M-6010-Z351)
* SCAT forged steel crankshaft
* SCAT forged steel H-beam connecting rods with ARP bolts
* Mahle forged pistons with floating wrist pins
* Solid steel billet roller camshaft
* Camshaft lift: .644 in. intake/.653 in. exhaust
* Camshaft duration at .050 in.: 258 degrees intake/260 degrees exhaust
* Double roller timing chain (M-6268-B302)
* CNC-ported Ford Performance aluminum "Z" cylinder heads (M-6049-Z304P)
* 2.08 in. intake valves and 1.60 in. exhaust valves
* PAC 1243 valve springs
* 11.1:1 compression ratio (nominal)
* Roller rocker arms; 1.65:1 ratio
* Exhaust ports raised 5/8 in.; may require custom headers
* Ford Performance SFI-approved vibration damper (M-6316-D302); may require a spacer for pulley alignment
* Fuel pump eccentric M-6287-B302
* 600 hp at 6,500 rpm
* 558 lbs.-ft. of torque at 5,000 rpm
* Engine type: 351 based small block Ford
* 4.125 in. bore x 4.00 in. stroke
* Ford Performance aluminum 4-bolt main block (M-6010-Z351)
* SCAT forged steel crankshaft
* SCAT forged steel H-beam connecting rods with ARP bolts
* Mahle forged pistons with floating wrist pins
* Solid steel billet roller camshaft
* Camshaft lift: .644 in. intake/.653 in. exhaust
* Camshaft duration at .050 in.: 258 degrees intake/260 degrees exhaust
* Double roller timing chain (M-6268-B302)
* CNC-ported Ford Performance aluminum "Z" cylinder heads (M-6049-Z304P)
* 2.08 in. intake valves and 1.60 in. exhaust valves
* PAC 1243 valve springs
* 11.1:1 compression ratio (nominal)
* Roller rocker arms; 1.65:1 ratio
* Exhaust ports raised 5/8 in.; may require custom headers
* Ford Performance SFI-approved vibration damper (M-6316-D302); may require a spacer for pulley alignment
* Fuel pump eccentric M-6287-B302