Replica/Kit Makes Ferrari 512bb replica coupe (1900)
Sale price: US $6,995.00 Make an Offer
| Condition: | Used | Year: | 1900 |
| VIN : | ABC945673xxx | Mileage: | 30,000 |
| Transmission: | Manual | Make: | Replica/Kit Makes |
| Body Type: | Coupe | Model: | Ferrari 512bb replica coupe |
| Warranty: | Vehicle does NOT have an existing warranty | Engine: | 5.7 liter V8 TPI |
| Vehicle Title: | Clear | Drive Type: | RWD |
| Power Options: | Air Conditioning, Power Locks, Power Windows | Fuel Type: | Gasoline |
| Exterior Color: | corsa rossa red | For Sale By: | Private Seller |
| Interior Color: | oyster | Disability Equipped: | No |
| Number of Cylinders: | 8 |
Las Vegas, Nevada, United States
Vehicle description
Another Non-paying Bidder.
1. Make sure you have the money BEFORE you bid 2. Make sure you can GET the car.
Close to $30,000 invested in Corson #008 ferrari 512BB kitcar for sale. Car is in LAS VEGAS. Built on 1987 fiero with calif. smog legal (stock) 5.7 liter TPI V8 (BAR sticker in doorjam) and 5 speed. Engine conversion was professionally done by V8 Archie using 1990 Trans Am-type CRATE engine. Fresh oil & filter change. New shocks and struts; many other Ferrari parts; about 30k miles on the engine. Driven to Las Vegas from Los Angeles 3 years ago, in storage since then but started occassionally. Starts right up. Working a/c, recent paint. Beautiful Euro interior with overhead console and push-button doors.
- Built on 1987 fiero which has larger gas tank and upgraded headlights (like the 1988 fiero) over prior years.
- 5 speed manual transmission with heat-treated gears.
- Simmons 16 inch wheels and tires. Front are 6 inch wide and rear are 8 inch wide (I think).
- professionally installed crate 1990 Trans Am engine with fresh oil and timing set. Functional OBD-1 port and engine is bone stock for easy maintenance. The install was done in Illinois by V8 Archie (V8 conversions still available - price them if you doubt my figures). This install is road-proven and runs terrific. Yellow top Optima battery, recent coolant and fail-safe thermostat. This install has been BAR approved in California and has the sticker in the door jam.
- New GM shocks and struts less than a few hundred miles ago
- Complete euro-interior with instrumentation. This interior is rare and no longer available new. Extra upholstery material available for perfect matching in case future repairs are needed.
- Approximate costs were $10,000 body kit, $4000 paint, $10,000 engine conversion (parts and labor), $3500 interior and upholstery, not including fiero donor and wheels and tires.
It would take at least 3 times the starting bid and MANY, many months to build and license another car like this.
Headlight doors need attached to hood; passenger front wheel and tire are stock fiero. Alpine stereo but needs door speakers. Alternator light ON and charges at only 11v - new alternator is about $100.
Serious buyers are invited to come to Vegas and check the car out. I will accept cash or similar payment method as payment. I will not accept checks, Paypal, bank transfers, etc. Buyers are responsible for pick-up! This vehicle is sold As-Is Where Is.
Will consider trade (need more room or motorcycle) + cash.
NO SALESMEN / SOLICITORS. Thank you On Jul-19-17 at 08:22:41 PDT, seller added the following information: The car starts right up and runs fine. It has a new oil and filter change and the timing was set. It has a yellow top optima battery. There are no problems with starting and running. The coolant was changed and a new fail safe thermostat installed about 500 miles ago. It has new shocks and struts but could use a four-wheel alignment. The front wheel is LOST. You can get another from Simmons if you want 16 inch wheels on the car. As far as I know, the car is road worthy right now. I would get a four wheel alignment. The car needs to have a current registration and insurance before it can be driven on the street. On Jul-19-17 at 08:29:26 PDT, seller added the following information: The car is titled as a 1987 Fiero. There is a california BAR sticker in the driver"s doorjam making the engine conversion legal. This is the ONLY CA smog-legal V8 5 speed fiero I have ever seen. On Jul-19-17 at 08:39:09 PDT, seller added the following information: Details of V8 Archie"s conversion kit are available here:
http:/ www.v8archie.us/master-kit2.html
This is $3200 for the KIT to do the conversion. The LABOR, ENGINE, TRANSMISSION and FIERO are NOT included in this price, nor the body and interior.
1. Make sure you have the money BEFORE you bid 2. Make sure you can GET the car.
Close to $30,000 invested in Corson #008 ferrari 512BB kitcar for sale. Car is in LAS VEGAS. Built on 1987 fiero with calif. smog legal (stock) 5.7 liter TPI V8 (BAR sticker in doorjam) and 5 speed. Engine conversion was professionally done by V8 Archie using 1990 Trans Am-type CRATE engine. Fresh oil & filter change. New shocks and struts; many other Ferrari parts; about 30k miles on the engine. Driven to Las Vegas from Los Angeles 3 years ago, in storage since then but started occassionally. Starts right up. Working a/c, recent paint. Beautiful Euro interior with overhead console and push-button doors.
- Built on 1987 fiero which has larger gas tank and upgraded headlights (like the 1988 fiero) over prior years.
- 5 speed manual transmission with heat-treated gears.
- Simmons 16 inch wheels and tires. Front are 6 inch wide and rear are 8 inch wide (I think).
- professionally installed crate 1990 Trans Am engine with fresh oil and timing set. Functional OBD-1 port and engine is bone stock for easy maintenance. The install was done in Illinois by V8 Archie (V8 conversions still available - price them if you doubt my figures). This install is road-proven and runs terrific. Yellow top Optima battery, recent coolant and fail-safe thermostat. This install has been BAR approved in California and has the sticker in the door jam.
- New GM shocks and struts less than a few hundred miles ago
- Complete euro-interior with instrumentation. This interior is rare and no longer available new. Extra upholstery material available for perfect matching in case future repairs are needed.
- Approximate costs were $10,000 body kit, $4000 paint, $10,000 engine conversion (parts and labor), $3500 interior and upholstery, not including fiero donor and wheels and tires.
It would take at least 3 times the starting bid and MANY, many months to build and license another car like this.
Headlight doors need attached to hood; passenger front wheel and tire are stock fiero. Alpine stereo but needs door speakers. Alternator light ON and charges at only 11v - new alternator is about $100.
Serious buyers are invited to come to Vegas and check the car out. I will accept cash or similar payment method as payment. I will not accept checks, Paypal, bank transfers, etc. Buyers are responsible for pick-up! This vehicle is sold As-Is Where Is.
Will consider trade (need more room or motorcycle) + cash.
NO SALESMEN / SOLICITORS. Thank you On Jul-19-17 at 08:22:41 PDT, seller added the following information: The car starts right up and runs fine. It has a new oil and filter change and the timing was set. It has a yellow top optima battery. There are no problems with starting and running. The coolant was changed and a new fail safe thermostat installed about 500 miles ago. It has new shocks and struts but could use a four-wheel alignment. The front wheel is LOST. You can get another from Simmons if you want 16 inch wheels on the car. As far as I know, the car is road worthy right now. I would get a four wheel alignment. The car needs to have a current registration and insurance before it can be driven on the street. On Jul-19-17 at 08:29:26 PDT, seller added the following information: The car is titled as a 1987 Fiero. There is a california BAR sticker in the driver"s doorjam making the engine conversion legal. This is the ONLY CA smog-legal V8 5 speed fiero I have ever seen. On Jul-19-17 at 08:39:09 PDT, seller added the following information: Details of V8 Archie"s conversion kit are available here:
http:/ www.v8archie.us/master-kit2.html
This is $3200 for the KIT to do the conversion. The LABOR, ENGINE, TRANSMISSION and FIERO are NOT included in this price, nor the body and interior.